Specialty sand market heats up with rebound in oil and gas drilling

Signs of the Canadian oil and gas industry's recovery from a punishing two-year downturn are emerging in unlikely places, including fine grains of sand.

Demand for the especially round and crush-proof type of sand used to help extract shale oil and gas is climbing, as more drilling rigs get fired up and operators pump higher amounts of sand into wells, say industry watchers, who foresee a big jump in the year ahead.

• Oil prices to average about $55 a barrel in 2017, Deloitte forecasts
• Federal Finance Minister BillMorneausays worst of oil shock appears to be over

"Things have really picked up," said Thomas Jacob, an analyst at research firm IHS Markit.

Canada's energy industry was hammered when OPEC producers hiked production starting in 2014, driving oil prices to around US$26 a barrel in early 2016. But with U.S. crude back at about US$49, demand for the sand needed for hydraulic fracturing, or fracking, in shale formations is also rebounding.

Sharp increase in fracking activity

Jacob expects Canadian demand to jump 70 per cent to 3.1 million tonnes this year for the specialty sand, which is pumped into the ground during a frack to keep cracked shale rocks wedged open and allow oil and gas to flow out.

Calgary-based Source Energy Services, for one, said it sold about 130,000 tonnes of the sand in January in Western Canada, up from 84,000 tonnes the same month a year earlier.

• Cenovus Energy buying most of ConocoPhillips' Canadian assets for $17.7B

Higher demand for sand follows a sharp increase in fracking activity. In the first two months of this year, 140 wells were fracked, according to the Alberta Energy Regulator up from 82 in the same period last year.

Momentum in the sector was enough to prompt Sourceto announce plans in Februaryfor a public stock listing. It said in regulatory filings that it expected this year's appetite for sand in Canada to surpass the record high of 3.7 million tonnes in 2014. That would be a big jump from the 2.4 million tonnes it said was used last year.

Source said that if the trend of using more sand per well is factored in, demand could top six million tonnes.

More sand per well

Companies have been pumping more sand per well in recent years after finding it helps improve the production and reliability, said Jacob.

"The intensity is increasing across the board at a very, very high rate," he said.

Source said that between 2013 and early 2016, the Montney formation that straddles the Alberta-British Columbia border saw a 91 per cent increase in sand per well.

• The lowdown on the Montney: Canada's next big energy bet has same high stakes as oilsands

Gas producer Seven Generations bumped up its tonnage per well by about a third just between the end of 2015 and end of 2016 to average about 6,500 tonnes of sand per well. The change helped boost the natural-gas condensate produced by the wells by about a third, said company spokesman Alan Boras.

"It's really about continuing to drive the costs lower on a per unit of what you can recover," said Boras.

An expected bump in sand demand didn't stop Source from getting cold feet on its public offering. It postponed plans after oil dropped back below US$50.

Competition from cheaper sand

Source also faces increased competition from suppliers with lower-quality sand mines that sit closer to the shale plays of northern British Columbia and Alberta.

Like the majority of Canadian suppliers, Source gets its top-tier white sand from mines in Wisconsin, the same type found in many golf course sand traps.

In the past, companies were wary of using lesser quality domestic sand, concerned that it wouldn't stand up to the extreme pressures several kilometres underground.

• Leaner oilpatch emerges from recession as new technology replaces jobs
• Rising oil production will push Alberta economy to fastest growth in country in 2017: Conference Board

That changed in the downturn as companies looked to cut costs everywhere, and started finding the cheaper sand was effective.

"We definitely see some blue-chip companies pumping the domestic product, because they're not seeing production benefits by pumping import or tier one products," said Mike Burvill, vice-president of fracturing at Calgary-based STEP Energy Services.

Savings up to $130,000 per well

Burvill estimates that about a third of the sand STEP pumps for clients is domestic brown sand, compared with 10 per cent before the downturn.

Encana chief operating officer Mike McAllister said on a conference call last year that the company had created long-term structural savings because it was using the cheaper local brown sands.

"The largest cost driver in our completion costs are water and sand," said McAllister. "In the Duvernay (formation) on a per-well basis, we are saving over $130,000 per well as a result of using that sand."

• MORE ALBERTA NEWS |Alberta's craft beer boom a shining example of economic diversification, says industry
• MORE ALBERTA NEWS |'A mighty bit of flying': Canadian air crews who pulled off daring Antarctic rescue honoured by Smithsonian