Via train rolled past Burlington stop signal and now its crew is temporarily suspended

A Via train travelling from London, Ont., to Toronto rolled past a stop signal inBurlingtonin a Labour Day incident that prompted Via to immediately replace the train's crew.

• Via derailment report says crew misperceived warning signal

• Rail accidents and disasters in Canada

• Rail safety documents heavily redacted or kept secret by Transport Canada

A Transportation Safety Board (TSB) incident report says thatat about 5:14 p.m. on Sept. 5, a Via train rolled about sixmetres past asignal indicating stop.The incident happened near Aldershot, Ont., a Burlington neighbourhood just east of Hamilton.

The stop signal was in place because a GO train on its way to Niagara from Toronto had recently passed over an intersection point ahead of the Via train.

A statement from Via said although the Via train rolled past the stop signal, it came to a full halt more than 760 metresfrom the spot where theGO trainhad crossed.

When the VIA train stopped,the GO train "was already beyond the intersection heading towards Niagara and there were no trains on the same line," the Via statement said.

"It was not close to a collision and there was no imminent danger," the statement says.

And although it wasn't a near-miss, Via says it considers any incident very serious in which train crews fail to obey a trackside signal.

"Like in your car, if you run a red light or a stop sign you always put yourself in grave danger," the statement says."For this reason, as soon as one of VIA Rail's [trains] is involved on a rule violation, we stop the train, we suspend the crew and replace them immediately with a new crew."

Via said it took time to get a new crew to the train, which wasstopped on the tracksfor more than 90 minutes until the new crew arrived.

Engineerstemporarily suspended pending investigation

Via says the train's engineers "have been temporarily relieved of their duties until the internal investigation is concluded."

The incident, which the TSB calls a "movement exceeding the limits of authority"will not result in a full TSB probe because there were no injuries and no equipment was damaged.

Sean Karow was a passenger on the trainwhen it stopped about one hour into its two-hour trip from London. He said passengers were originally only told the train was stopping due to a "service condition."

"People were upset," Karow told CBC News. "Initially we weren't told why we were stopped."

Only later did passengers learn the train was stopped because the crew was being replaced, Karow said.

Via apologizes, offers travel credit

Passengers were sent a notice from Via president Yves-Desjardins Siciliano apologizing for the incident but his apology also didn't explain why the train was stopped and the crew replaced. Affected passengers were offered a travel credit to be used on a future Via trip.

Via did not issue a newsrelease about the incident and provided itsstatement in response to inquiries from CBC News.

Karow said Via's messages to passengers about why the train stopped could have been clearer.

"To me this is pretty serious," said Karow. "It's like an airplane flying with one engine burned out and not telling passengers."

The TSB has flagged as an industry-wide safety concern incidents in which train crews fail to obey trackside signals.

The Sept. 5 incident happened not far from the spot where a Via train derailed and its locomotiveflipped overin February of 2012, killing three crew members and injuring 45 passengers.

In its investigation intothat deadly derailment, the TSB found that the crew misinterpreted a signal warning them to slow down. In its report, the TSB called onthe railway industry to implement what's called positive train control (PTC) systems on all Canadian railways.

Such systems can override control of trains when crewsfail to obey signals that tell them to stop or slow down.

• Transport minister wants to know what caused Toronto derailment
• IN DEPTH |Denis Coderre presses feds for tougher rail safety measures