Province says it's not budging on Boat Harbour deadline

The Nova Scotia government will not relax its January 2020 deadline to close the Boat Harbour wastewater effluent treatment facility, even though regulatory issues have delayed the start date for the massive cleanup project by months and perhaps even a year.

The delay issignificant because Northern Pulp has asked the province to keep Boat Harbour open beyond the scheduled closing in order to continue treating 75 million litres of effluent daily from its Pictou County pulp mill.

The mill says it needs more time to prepare the waste treatment facility that will replace Boat Harbour.

Kathy Cloutier, a spokesperson for parent company Paper Excellence, said the remediation delay is more evidence of the pitfalls of settingdeadlines before regulatory approval.

"We have asked and have said we need an extension," she told CBC News. "So, does this help?One would have to say yes.If they aren't ready and we need to use it, then we would prefer to do that."

Province still firm on deadline

But the province seems uninterested in accommodating the mill.

The Liberal government maintains it gave Northern Pulp plenty of notice the treatment facility's days were numbered when it passed a law to close Boat Harbour four years ago.

"The province remains committed to the legislated closure date of January 31, 2020, under the Boat Harbour Act," spokesperson Marla MacInnis said late Wednesday in an e-mailed statement.

The remediation project for Boat Harbour, and its timetable, is separate from the new treatment system that is being proposed by Northern Pulp to replace Boat Harbour.

That projectis facing its own regulatory and environmental challenges.

"It's a big, complex problem," said Ken Swain, the project manager for the Boat Harbour cleanup. "It's a pretty complicated solution."

Nova Scotia on the hook

Since 1967, lagoons adjacent to the Pictou Landing First Nation have received tens of millions of litres of wastewater effluent per day from the nearby pulp mill.

The Boat Harbour treatment facility is owned by the provincial government, which is on the hook for the cleanup once the facility closes. The cost is forecast at $217 million.

Controversy swirls over where the mill's latest owner, Northern Pulp, plans to discharge treated effluent when Boat Harbour closes.

Swain said the remediation is proceeding on the assumption Boat Harbour will close by Jan. 31, 2020, even if the Boat Harbour cleanup is not ready to proceed.

"We're probably gonna have to push that back," Swain said.

Cleanup expected to start in 2021

Swain points to the environmental assessment process. The cleanup project will undergo a Tier II provincial environmental assessment, which includes an independent review panel and public hearings. It can last up to 275 days.

Last week, the province submitted its plans to the Canadian Environmental Assessment Agency. The agency will decide in February whether the project should undergo a federal assessment.

Procurement will follow regulatory approval and take months longer.

"So what we would probably see in that instance is not being able to have the full-scale implementation started until perhaps early 2021," Swain said.

Boat Harbour cleanup plan

The plan is to dredge up to a million cubic metres of contaminated, watery sediment and pipe it to a pad where water will be removed for treatment.

Up to 500,000 cubic metres of solids will be moved to an existing and expanded containment cell on site.

"The biggest technical challenge is effectively removing that material off the bottom of Boat Harbour," said Swain.

"We want to figure out the most efficient and effective way of getting the lens of contaminated sludge off the bottom and taking as little as possible of the clean underlying harbour bottom."

Why a key pilot project was suspended

They are still looking for the right solution.

Last October, dredging began to test techniques, but the pilot project was suspended in December because cold weather froze pipes.

The pilot project will resume sometime in April or May.

What's in raw mill effluent?

In May 2017, the province awarded a $6.7-million contract to GHD, an international consulting firm, to come up with the detailed plan for the cleanup.

The plan submitted to the federal government on Jan. 7 is from GHD and Nova Scotia Lands, a provincial agency charged with environmental cleanup.

GHD determined the nature and extent of contamination.

It also compared raw effluent with provincial and federal standards.

"Results indicated both PCBs and dioxins and furans were below the applicable criteria, while metals exceed the marine criteria for barium, boron, cadmium, copper, lead, mercury, and zinc. Metals parameters reported to exceed the Provincial human health criteria were sodium and vanadium," the project description stated.

The good news

The contaminated sludge is 10 per cent solids and 90 per cent water. The goal is remove between 50 to 70 per cent of the water.

The good news so far is water removed from the sludge is relatively clean.

"It will need some treatment, but not to the extent that we initially were envisioning," Swain said.

"We know we have to deal with in excess of five million cubic metres of water during the full-scale implementation of the remediation, which is several thousand Olympic-size swimming pools. So it's a large volume, a big-cost driver."

How the forecast cost has increased

In 2018, the cost of the full cleanup was estimated at $217 million.

It has risen steadily since the initial estimate of $52 million in 2015, $88 million in 2016 and $133 million in 2017.

A new forecast is expected in mid-2019 after the pilot project is completed.

The goal of the cleanup is to return Boat Harbour tidal estuary to its original condition in 1967 which means removing all the contaminated sediment.

"We'll have to be clean," said Swain.

"At the end of the day what goes out needs to be in compliance with the Fisheries Act. So we cannot release any deleterious substances into the environment so we've got to get it all."