Most styrofoam isn't recycled. Here's how 3 startups aim to fix that

Reduce, Reuse and Rethinkis a CBC News series about recycling. We're exploring why our communities are at a turning point and exploring ways to recycle better. You can be part of the conversation by joiningour Facebook group.

Virginie Bussires jokingly refers to styrofoam as "public enemy No. 6." That's because the polystyrene takeout containers, electronics packaging, coolers and other products we discard each year are more likely to pollute waterways or get buried in landfills than they are to be recycled. (The No. 6 is a reference to the plastic's identification number or resin code). And once in the environment, they can take decades or even centuries to break down.

But Bussiresand her colleagues at Montreal-based Pyrowave are hoping to reform styrofoamliterally into a resource that everyone wants to recycle.

And they're not the only ones. Montreal-based Polystyvert and Brantford, Ont., based GreenMantra have a similar vision, but different technological solutions.

The material commonly called styrofoam is properly known as expanded polystyrene foam or EPS, which comes in a variety of colours (not to be confused with Styrofoam, a trademarked brand of extruded polystyrene foam or EPS used to make blue insulation boards.)

A recent report from the Canadian Chamber of Commerce found that, in 2012, 80 per cent of styrofoam waste in Canada, more than 6,500 tonnes, ended up in landfills or waterways.

That's because most communities don't recycle it just 35 per cent accept polystyrene in their recycling programs, according to the Canadian Plastics Industry Association.

It's even worse in the U.S., which recycled less than fourper cent of its polystyrene containers and packaging in 2012, the Environmental Protection Agency reports.

The main problem is it's not cost-effective to collect a material that's so bulky and light, and breaks apart so easily, contaminating other recyclables. And there aren't a lot of buyers once it's collected. Many jurisdictions, including the City of Toronto, have to effectively pay companies to take it.

Hot new tech

But the cost isn't the only issuewith traditional, "mechanical" recycling.

Bussires, vice-president of communications, marketing and government affairs for Pyrowave, says it also has trouble coping with contamination from things like food residues that are often found on food containers.

And as with most plastics, traditional styrofoam recycling is not actually a cycle.

After processing, it's no longer expandable or foam-like. Instead, it gets turned into hard plastic for things like crown moldings, picture frames and park benches. That is, it can only be "recycled" once.

That's the difference with Pyrowave's technology it uses a "chemical recycling" process to take waste polystyrene and generate brand-new styrofoam.

Microwaves heat up and break down polystyrene molecules, which are long chains, into their individual links called styrene. That in turn can be chemically processed back into polystyrene.

"All the contamination is taken away in the process," Bussiresadded.

That means the processcan start with dirtier styrofoam than traditional recycling can handle, and generate new styrofoam with 100 per cent recycled content that's identical to styrofoam made directly from petroleum.

"We can reduce our dependency on oil," Bussiressaid. "That's the vision behind the technology."

She added that it's also the key to a so-called circular economy based on resources being endlessly reused and recycled instead of extracted new and then landfilled at their end of life as they mostly are now.

Pyrowave estimates its recycling process can produce polystyrene with a tenth of the energy and half the greenhouse gas emissions of polystyrene made directly from oil, and says it can sell its styrene at a price that's competitive with "virgin" styrene produced from crude oil.

The product can also be recycled over and over again, although currently about 10 per cent is lost each time.

Bussiressays polystyrene is ideal for chemical recycling because every chain link is the same (in many polymers, there are different kinds of chain links): "Technology can bring something that was public enemy No. 6 to one of the easiest to recycle."

The company launched a pilot test of its technology in November 2018 in Salaberry-de-Valleyfield, Que., near Montreal. Its plant can handle about 100 or 200 kilograms an hour. The resulting styrene oil is sold to Sarnia, Ont.-based chemical supplier INEOS Styrolution Canada.

Bussiressaid the company is also in discussions with Health Canada to get food grade approval for polystyrene made through its process.

Dissolution solution

Not far from Pyrowave, another Montreal company says it can also make polystyrene from 100 per cent recycled materials.

Polystyvert says its process also generates a material identical to new polystyrene.

The difference is that instead of breaking the polystyrene down, Polystyvert simply dissolves it, in the essential oil cymene.

"It's a change of state," said Solenne Brouard Gaillot, the company's founder and CEO, who likened it to the transition between snow and water.

The company supplies solvent-containing concentrators to companies that can be placed on-site. By dissolving styrofoam before transportation, it says it can put 10 times more styrofoam in the same truck.

Once dissolved, it can be resolidified with another solvent, and washed and filtered multiple times to remove contaminants before being reformed into polystyrene pellets. Those can be turned back into styrofoam.

The solvents can be recycled and reused repeatedly, and so can the styrofoam itself.

"Without any end. That's the point," Brouard Gaillot said.

Because it doesn't need to be chemically broken down into styrene and then reprocessed into polystyrene, Brouard Gaillot says Polystyvert's process is cheaper and lower energy than Pyrowave's.

She added that the polystyrene pellets it produces are cheaper than "virgin" polystyrene made from oil, and that's important because manufacturers aren't willing to pay a premium for a "greener" product.

Polystyvert opened a Montreal demonstration plant in June 2018 that can process 125 kilograms of polystyrene per hour or 800 tonnes a year. It gets its polystyrene from both municipalities and companies such as fridge distributors.

The polystyrene it produces is currently being sold to a company that makes insulation.

But it, too, is trying to get food grade approval from Health Canada and U.S. FDA so it can make food containers.

And now for something completely different

But is turning discarded styrofoam takeout containers back into things like new styrofoam takeout containers the best solution?

Jodie Morgan, CEO of Branftford, Ont.-based GreenMantra doesn't think so.

"We believe that plastic in general is a fairly low-value product," she says. "And then we spend a lot of money collecting that product, sorting that product, processing that product all so it can go back into a relatively low-value end product."

She thinks in order to boost plastic recycling rates around the world, recycling needs to be more worth the effort, and for that to happen, waste plastic needs to be worth more.

GreenMantra's technology turns discarded styrofoam into something completely different.

It's a form of chemical recycling, like Polystyvert's technology. But instead of breaking the styrofoam chains into their individual links, it only cuts them into smaller pieces.

That generates a material completely different from styrofoam.

"Through using this molecule, we can create products that can have much more value than the original plastic," Morgan said.

Those include additives for inks and coatings for the printing industry that make them glossier, easier to print out and more durable. They replace similar additives made directly from fossil fuels, says Domenic di Mondo, GreenMantra's vice-president of technology.

Another of the company's goals is to make it easier for styrofoam to be reused. Right now, that's tricky because so many different kinds of styrofoam are collected for recycling together, and they're hard to mix into a single product.

GreenMantra's additive could help them mix evenly so they can be turned into more products like insulation boards. Morgan likened it to the emulsifier in bottled salad dressing that keeps the oil and water from separating.

Di Mondo says the additive can also lower the density of the foam, boosting its performance as an insulator.

The company has just built a Brantford, Ont., demonstration plant that it expects will open in a month or two and will be able to process thousands of tonnes of polystyrene a year.

And unlike Pyrowave and Polystyvert, which are getting their raw materials for free, GreenMantra says it is choosing to actually pay money for some of the waste polystyrene it will be getting from companies and municipalities.

"In part, why we're doing that is to drive more collection," Di Mondo explained.

Environmental impact

That's welcome news for cities struggling to find a home for their waste styrofoam.

Nadine Kerr, manager of processing and resource management at the City of Toronto, says that's the city's biggest styrofoam recycling challenge right now.

At the moment, Pyrowave, Polystyvert and GreenMantra are operating on a relatively small scale as they take measurements and tweak their technology. Polystyvert, for one, says it's getting more offers of free styrofoam waste than it can handle.

Kerr said the City of Toronto has done trials with two of the three companies to test the new technology.

"So there is some hope for this material," she said.

Andrea Hicks, an assistant professor of civil and environmental engineering at the University of Wisconsin, Madison published a recent study that looked at the environmental impact of polystyrene through its life cycle.

It found extracting the raw materials for polystyrene is "environmentally taxing" because they need to be distilled from crude oil.

From that perspective, Hicks thinks it's interesting that new styrofoam recycling technologies are displacing those raw ingredients.

But she noted that the styrofoam needs to be re-expanded and shaped, and shaping and moulding alone consumes 30 per cent of the energy in the life cycle of styrofoam.

She added that it's not a given that anynew recycling technology is better for the environment.

That depends on the amount and type of energy used to power the process, as well as the other materials, such as solvents, used in the process. "And the environmental impact of that."

Hicks's study found that recycling reduced styrofoam's environmental footprint, but reusing did even more.

"There's that whole reduce, reuse, recycle," she said. "And I think what people really miss is it's actually a hierarchy. We're supposed to reduce what we're using, then reuse, and the last case is recycling."